Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(2a) (OL-12208-03, February 2007)

Send documentation comments to [e-mail]
24
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(2a)
OL-12208-03
Caveats
Resolved Caveats
• CSCsh69086
Symptom: Zone member configuration based on interface domain does not work correctly in Cisco
MDS SAN-OS 3.1(1) and3.1(2) when you use CLI commands to configure interface-domain zones.
Workaround: This issue is resolved.
• CSCsh71985
Symptom: The Performance Manager in Cisco Fabric Manager does not collect and report the
correct Fibre Channel flow statistics.
Workaround: This issue is resolved.
Open Caveats
• CSCei82909
Symptom: The implementation of the Internet Key Exchange (IKE) version 2 in Cisco MDS 9000
switches may not be interoperable with other IKE version 2 implementations. Our IKE version 2
implementation is used whenever an encrypted FCIP tunnel is established between two MDS
switches.
Workaround: If a Cisco MDS 9000 switch tries to establish an IKE version 2 tunnel with a
non-MDS switch running IKE version 2, or vice versa, the gateway or the Cisco MDS 9000 switch
should be configured to use IKE version 1 for that tunnel.
• CSCsh31236
Symptom: On a Cisco MDS 9513 Switch, when there are more than 512 ports on a single chassis,
some ports with indexes between 0x200 and 0x20f may not come up. In addition, some ports with
indexes between 0x0 and 0xf may show unexpected behavior when the ports with indexes between
0x200 and 0x20f are brought up. To display the port indexes, issue the show system internal fcfwd
idxmap port-to-interface command. The port indexes appear in the column with the heading “glob
idx.”
Severity 3
CSCin95789 OO
CSCsd21187 OO
CSCse31881 OO
CSCsg19148 OO
CSCsg19303 OO
CSCsh69086 OR
CSCsh71985 OR
Table 9 Open Caveats and Resolved Caveats Reference (continued)
DDTS Number
Software Release (Open or Resolved)
3.1(2) 3.1(2a)