Manualshelf

Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 6.2(1) (OL-29201-01, April 12, 2013)

ManualsBrandsHP ManualsStorageCisco MDS 9506 Multi-layer Director Switch
21222324252627282930
28
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 6.2(1)
OL-29201-01
Caveats
FCoE on the Cisco MDS 9710 Director
The Cisco MDS 9710 Director does not support FCoE. However, the following command-line interface
(CLI) commands display information about FCoE, even though the FCoE functionality does not work
on the Cisco MDS 9710 switch:
• The show feature-set command shows fcoe feature-set enabled.
• The show fcoe command shows FCoE FCF details.
• In global configuration mode, the fcf argument to the fcoe command can be modified.
• The vlan vlan-number command allows the VLAN to be created.
• The show vlan command shows VLAN information.
FCoE vlan-vsan map creation through SNMP is allowed.
FCoE can be enabled or disabled through SNMP.
ASCII File Can Be Copied to the Startup Configuration
The copy bootflash:runnig-config.ascii startup-config command that was deprecated in an earlier
Cisco NX-OS release, is enabled in Cisco NX-OS Release 6.2(1).
Fibre Channel Security Protocol (FCSP) Not Supported
The Fibre Channel Security Protocol (FCSP) feature is not supported in Cisco NX-OS Release 6.2(1).
Install Module Command Changes
The install module module-number bios command is not supported on the Cisco MDS 9710 switch in
Cisco NX-OS Release 6.2(1) and later releases. Use the install all command to upgrade the bios during
a software upgrade.
The install module module-number bios command continues to be supported in Cisco NX-OS Release
6.2(1) on Cisco MDS 9500 Series switches.
Fabric Binding Error Message
When fabric binding is enabled, an error message appears whenever the Mainframe Package license is
not installed and also when the grace period is disabled. There is functional impact associated with the
error message and the feature is enabled correctly.
Caveats
This section lists the open and resolved caveats for this release. Use Table 20 to determine the status of
a particular caveat. In the table, “O” indicates an open caveat and “R” indicates a resolved caveat.