Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8b) (OL-27554-06, July 12, 2013)

Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8b)

OL-27554-06

Caveats

• CSCtz40745

Symptom: A “VSAN down” trap is sent for VSAN 4094 when a trunk port goes down even though

the VSAN is not configured on the trunk.

This symptom might be seen only when a link down occurs on an E, TE, or TF port.

Workaround: Ignore the trap.

• CSCua09712

Symptom: Communication errors that occur during the master key rekey are not handled gracefully.

Workaround: None.

• CSCtz84847

Symptom: When creating a cluster, key management servers are not listed in the drop-down list.

Workaround: Manually enter the IP address of the server.

• CSCty47599

Symptom: The master key share fails if crypto cluster configuration changes during process.

Workaround: None.

• CSCub15824

Symptom: The switch sends LOGO-ACC before the Fibre Channel Name Server (FCNS) database

is updated.

Condition: When a virtual machine (VM) moves to another partition, the VIO performs a LOGO

first and then with the same World Wide Name (WWN) from the new location does a fabric login

(FLOGI) or FDISC again. This occurs within 10 milliseconds to minimize downtime to the VM.

Workaround: None.

• CSCuf82609

Symptom: After an In Service Software Upgrade (ISSU) on the Cisco MDS 9222i switch, Cisco

Fabric Services (CFS) merge is initiated.

Workaround: None.

• CSCug36861

Symptom: The Cisco MDS 9222i switch discards frames as timeout-type drops. The timeout-type

drop occurs periodically every 15 minutes.

Condition: When a user upgrades to Cisco MDS NX-OS Release 5.2(8) or 5.2(6b) from a preceding

version of Cisco MDS NX-OS software.

Workaround: None.

• CSCud32085

Symptom: On a Cisco MDS 9222i, Storage Media Encryption (SME) disks discovery fails to detect

any disk on the HP BladeSystem c7000 enclosure.

Condition: This occurs when a user attempts to perform the Add Disk Group operation on the

Cisco Data Center Network Manager (DCNM) Web Client to configure SME.

Workaround: Remove the port channel trunk from the Fibre Channel link.