HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE-TE, December 2006)

During setup, the install procedure places a Microsoft iSCSI Initiator icon (Figure 3)ontheserver
desktop as well as in the control panel. The Microsoft iSCSI Initiator also h as a CLI. Refer to the user
guide for more information.
Figure 3 M icrosoft iSCSI Initiator icon
To install the Microsoft iSCSI Initiator:
1. Double-click the Microsoft iSCSI Initiator icon to open the iSCSI Initiator P roperties window
(Figure 4).
Figure 4 iSCSI Initiator Properties window
2. Click Add to add the IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module
(14/2),, or MDS 9216i switch iSCSI Ethernet address to the initiator.
The Add Target Portal window appears (Figure 5).
NOTE:
This example uses the GbE address (33.33.33.170).
Figure 5 Add Target Portal win d ow
3. Enter the appropriate information in the followi ng boxes:
•IPaddressorDNSname
C-Series iSCSI
17