Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
3-6
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 3 Fabric Manager Server
Modifying Fabric Manager Server
Figure 3-2 FM User Dialog Box
Step 3
Set the user name and password for the new user, and then click Apply.
To remove a Fabric Manager Server user using Fabric Manager, perform this task:
Step 1 Click the Local FM Users tab in the Control Panel dialog box (see Figure 3-1).
You see a list of Fabric Manager users.
Step 2 Click the user name you want to delete.
Step 3 Click Remove to delete the user.
Step 4 Click Yes to confirm the deletion or No to cancel it.
Changing the Fabric Manager Server User Name and Password
You can modify the user name or password used to access a fabric from Fabric Manager Client without
restarting Fabric Manager Server.
To change the user name or password used by Fabric Manager Server, perform this task:
Step 1 Choose Server > Admin.
You see the Control Panel dialog box with the Fabrics tab open, as shown in Figure 3-1.
Step 2 Set the Name or Password for each fabric that you are monitoring with Fabric Manager Server.
Step 3 Click Apply to save these changes.
Changing the Polling Period and Fabric Rediscovery Time
Fabric Manager Server periodically polls the monitored fabrics and periodically rediscovers the full
fabric at a default interval of five cycles.You can modify these settings from Fabric Manager Client
without restarting Fabric Manager Server.