Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)
Send documentation comments to mdsfeedback-doc@cisco.com
2-50
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message DSTATS-3-PSS_SNAPSHOT_DEBUG_FAIL: pss snapshot runtime debug to
uri:[chars] failed due to error: [hex].
Explanation DSTATS failed to snapshot the persistent storage service (PSS) runtime debug to the
URI because of the reason shown in the error message.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes in the output for the
cause of the PSS error.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message DSTATS-3-PSS_SNAPSHOT_FAIL: pss snapshot runtime to uri:[chars]
failed due to error: [hex].
Explanation DSTATS failed to snapshot the persistent storage service (PSS) runtime to URI because
of the reason shown in the error message.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes in the output for the
cause of the PSS error.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message DSTATS-3-PSS_STORE_FAIL: pss store runtime entry key:[hex] val:[hex]
failed due to error: [hex].
Explanation DSTATS failed to store the persistent storage service (PSS) runtime entry key/value
pair because of the reason shown in the error message.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes in the output for the
cause of the PSS error.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
EPP Messages
This section contains the exchange peer parameters (EPP) messages.
EPP-5
Error Message EPP-5-EPP_FAILURE: Interface [chars] EPP Failure.
Explanation Trunk protocol failed.
Recommended Action Enter show epp internal event-history err to determine what errors were
encountered.
Introduced Cisco MDS SAN-OS Release 1.2(2a).