Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-12
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message ACLTCAM-2-ACL_TCAM_MTS_REGISTRATION_FAILED: MTS registration failed
for opCode: [dec].
Explanation The messaging and transaction service (MTS) registration failed for the reason shown
in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ACLTCAM-2-ACL_TCAM_NO_ROUTE: ACLTCAM failed to get route for VSAN:
[dec], Rewrite: [chars] DID: [chars] DID MASK: [chars], error: [hex].
Explanation The ACLTCAM process experienced a failure while getting a route for the VSAN.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message ACLTCAM-2-ACL_TCAM_NO_TCAM_LEFT: ACLTCAM resource exhausted for
interface : [chars].
Explanation The access control list TCAM hardware resource is full.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_READ_FAILED: [chars] read from hardware
TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec], Error:
[chars]).
Explanation A read from the TCAM failed. The error message shows the ASIC and TCAM
associated with this failure and shows the TCAM address, number of entries, and the error that
occurred.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release1.2(2a).
Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_WRITE_FAILED: [chars] write to hardware
TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec], Error:
[chars]).
Explanation
A write to the TCAM failed. The error message shows the ASIC and TCAM associated
with this failure and shows the TCAM address, number of entries, and the error that occurred.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).