Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-399
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SYSTEMHEALTH-2-OHMS_LC_CF_INIT_ERRORS: Compact Flash firmware CRC
checksum procedure encountered an error during initialization on module [dec]
Reason: [chars].
Explanation
Compact Flash CRC checksum initializations failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.3(1a).
Error Message SYSTEMHEALTH-2-OHMS_MOD_PORT_LB_TEST_FAILED: Module [dec] Port [dec]
has failed loop back tests.
Explanation
Port loop-back test failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SYSTEMHEALTH-2-OHMS_NVRAM_FAILED: Nvram test maximum failures reached
for module [dec] for blocks 0x%llx.
Explanation
NVRAM failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message SYSTEMHEALTH-2-OHMS_MOD_RELOAD_REQ: Module [dec] reload being
requested due to errors found by [chars] test.
Explanation
System Health module reload request.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SYSTEMHEALTH-2-OHMS_MOD_SNAKE_TEST_FAILED: Module [dec] has failed
snake loopback tests.
Explanation
Snake test failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SYSTEMHEALTH-2-OHMS_SUP_CF_CRC_FAILED: Compact Flash firmware CRC
checksum on module[dec] is corrupted.
Explanation
Compact Flash firmware corrupted.
Recommended Action Replace the compact flash on this module.
Introduced Cisco MDS SAN-OS Release 3.1(3).