Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-285
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message RIB-3-FIB_EXIT: fib exited.
Explanation
The Forwarding Information Base (FIB) had exited and may not continue operation.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message RIB-3-MISS_APPS: Missing response from service.
Explanation Service not responding to the Routing Information Base (RIB).
Recommended Action Enter the debug rib error command, or use a similar Fabric Manager
procedure, then recreate the operation scenario to find out more details.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message RIB-3-NO_MEM: Out of memory.
Explanation
The Routing Information Base (RIB) does not have enough memory to continue proper
operation.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message RIB-3-SEND_FIB: Cannot talk to fib.
Explanation The Routing Information Base (RIB) to the Forwarding Information Base (FIB)
interprocess communication (IPC) failure.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message RIB-3-SEND_SNMP: Cannot respond to snmp.
Explanation
The Routing Information Base (RIB) to SNMP interprocess communication failure.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).