Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to mdsfeedback-doc@cisco.com
2-142
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message IPS-4-FCIP_LICENSE_BIND_FAILED: Bind failed for [chars] due to [chars]
for license failure; configuration accepted but bind failed.
Explanation The FCIP configuration was accepted but the FCIP interface did not bind to a physical
interface because the appropriate license was not available. If a license becomes available in the
future, this FCIP interface will bind to a physical interface automatically.
Recommended Action Check the license state using either the CLI show license usage command or
a similar Fabric Manager procedure. Acquire the necessary FCIP license.
Introduced Cisco MDS SAN-OS Release 3.0(1).
IPS-5
Error Message IPS-5-FCIP_BIND_FAILED: Bind failed for [chars] due to [chars] for
[chars].
Explanation
The FCIP interface bind to the Ethernet port failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message IPS-5-FCIP_FTA_ALREADY_OFF: FTA Already Off, [chars] VSAN: [hex].
Explanation FTA is already turned off.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IPS-5-FCIP_FTA_ALREADY_ON: FTA Already ON, [chars] VSAN: [hex].
Explanation
FTA is already turned on.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IPS-5-FCIP_FTA_CB_DOWN: FTA [chars] is DOWN.
Explanation
FTA is down.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IPS-5-FCIP_FTA_CB_UP: FTA [chars], is UP.
Explanation FTA is up.
Recommended Action No action is required.