HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE-TE, December 2006)

Figure 2
7BothC-Seriesswitchesaretargetportals
C-Series switch side: configuring transparent-mode static mapping
The iSCSI-enabled C-Series switches have two modes of mapping IP addresses:
• Transparent-mode dynamic m apping
• Transparent-mode static mapping
Yo u must enable static mapping for each iSCSI Initiator for persistent LUN mapping from the Fibre
Channel storage controller.
1. Using the Cisco Device Manager, select IP > iSCSI from the menu bar.
The IP iSCSI window opens (Figure 28).
Figure 28 IP iSCSI win dow
2. Clear the Discovery Dynamic check box (Figure 29).
C-Series iSCSI 35