HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE-TE, December 2006)

Figure 11 Log On to Target—Set persistent target
3. Select the Automatically restore this connection when the system boots check box to ensure that the
controller por t is enabled as a persistent target.
4. Click OK.
The Available Target window shows the status for the storage controller iqn as Connected (Figure 12).
Figure 12 Available targets window—Connecte d status
5. Click the Active Sessions tab to verify the connection to the EVA.
The storage controller session Status appears as Connected (Figure 13).
C-Series iSCSI 23