Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-464
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
ZONE Messages
This section contains the zone messages.
ZONE-2
Error Message ZONE-2-LZ_EXITING: LUN/Read-only Zoning Process exited. Reason:
[chars].
Explanation
The LUN read-only zoning process has exited because of the reason shown in the error
message . The process restarted automatically.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ZONE-2-LZ_GENERAL_ERROR: [chars].
Explanation The LUN read-only zoning process has encountered a critical error. The description of
error is shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ZONE-2-LZ_INIT_FAILED: Initialization of LUN/Read-only Zoning Process
failed at [chars].
Explanation
Initialization of LUN read-only zoning process failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ZONE-2-LZ_MALLOC_ERROR: Size [dec] bytes.
Explanation
The LUN read-only zoning process could not allocate memory.
Recommended Action Copy the error message exactly as it appears on the console or in the system
log. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you
purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).