Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-383
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SYSMGR-3-INVALID_UUID: Service [chars] is configured with UUID [hex],
but uses UUID [hex].
Explanation The identity of a service is inconsistent in the image file.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-3-ISSU_BEGIN_FAILED: ISSU cannot proceed (error-id [hex]).
Explanation
This message indicates that a service has blocked the nondisruptive upgrade.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message SYSMGR-3-MISSING_OPTIONAL_CAPABILITY: Incomplete support for the
current running-config on standby supervisor.
Explanation
Loose configuration incompatibilities exist between active and standby supervisors.
Operational redundancy mode is still set to high availability.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-3-MODULE_LOCK_FAILED: Failed to lock the local module to avoid
reset (error-id [hex]).
Explanation
Locking the local module has failed. Reloading the local module may now cause
switchover to fail.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-3-OPERATIONAL_MODE_WARM: Operational redundancy mode set to
warm (error-id [hex]).
Explanation
Operational redundancy mode will be set to warm. The error message shows the error
ID representing the reason.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).