Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-222
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message PLATFORM-2-MOD_PWRIDPROMFAIL: Module [dec] failed to power up due to
IDPROM read error.
Explanation The module cannot be powered up because of IDPROM read error.
Recommended Action Use the CLI commands show platform internal all module [decimaldigit]
and show module internal all module [decimaldigit] and show sprom module[dec][dec] to read
module IDPROM contents to collect more information.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message PLATFORM-2-MOD_PWRUP_XBAR: Modules powered up due to xbar
availability.
Explanation Modules powered up because at least one xbar module is online.
Recommended Action No action needed.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message PLATFORM-2-MOD_TEMPMINALRM: Module [dec] reported minor temperature
alarm (sensor-index [dec] temperature [dec]).
Explanation Module has exceeded a minor temperature threshold.
Recommended Action Enter the show env temperature CLI command or use a similar Fabric
Manager/Device Manager procedure to collect more information.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-2-MOD_TEMPOK: [chars] recovered from minor temperature alarm.
Sensor=[dec] Temperature=[dec] MinThreshold=[dec].
Explanation
The module in the slot named recovered from a major temperature threshold alarm.
Recommended Action Enter a showenvtemperature command to collect more information.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message PLATFORM-2-MOD_TEMPRECOVER: [chars] recovered from major temperature
alarm. Minor temperature alarm pending. Sensor=[dec] Temperature=[dec]
MAJThreshold=[dec] MinThresh=[dec].
Explanation The module in the slot named recovered from a major temperature threshold alarm and
the minor threshold is still exceeded.
Recommended Action Enter a showenvtemperature command to collect more information.
Introduced Cisco MDS SAN-OS Release 3.0(1).