Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-114
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Introduced Cisco MDS SAN-OS Release 1.3(4a).
Error Message FLOGI-5-MSG_PORT_LOGGED_IN: [VSAN [dec], Interface [chars]] Nx Port
[chars] with fcid [chars] logged IN.
Explanation
Nx port logged in with the specified information.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FLOGI-5-MSG_PORT_LOGGED_OUT: [VSAN [dec], Interface [chars]] Nx Port
[chars] logged OUT.
Explanation
Nx port logged out.
Recommended Action Enter the show interface, show VSAN, or show module command (or use an
equivalent Fabric Manager/Device Manager procedure) to help determine why this Nx port logged
out. You can alternatively use Fabric Manager and/or Device Manager instead of the command line
method.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
FSPF Messages
This section contains the Fabric Shortest Path First (FSPF) messages.
FSPF-2
Error Message FSPF-2-SHUTDOWN: Routing daemon shutting down : [chars].
Explanation
Fabric Shortest Path First (FSPF) routing daemon is shutting down because of the
reason shown in the error message.
Recommended Action This is a severe problem. Provide the reason shown and the log files for Fabric
Shortest Path First (FSPF) to your customer service representative.
Introduced Cisco MDS SAN-OS Release 1.2(2a).