Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide (OL-7765-06, November 2007)

Send documentation comments to [e-mail]
B-3
Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide
OL-7765-06
Appendix B Quick Config Wizard
Adding or Removing Zone Ports
Figure B-2 Quick Config Wizard
Step 3 Click a check box in the Ports Zoned To column for the port you want to add or remove from a zone. The
check box for the matching port is similarly set. The selected port pair is added or removed from the
zone, creating a two-device zone.
The VSAN pull-down menu provides a filter that enables you to zone only those devices within a
selected VSAN.
Step 4 Right-click any of the column names to show or hide a column.
Step 5 Click Next to verify the changes or click Cancel to close the dialog box.
You see the Confirm Changes dialog box shown in Figure B-3.