Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-25
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message CERT_ENROLL-3-CERT_EN_FIPS_MODE_INIT_ERROR: Could not initialize FIPS
mode : [chars].
Explanation FIPS mode initialization error.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message CERT_ENROLL-6-CERT_EN_MESSAGE: [chars].
Explanation
The digital certificate enrollment process generated an informational message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
CFS Messages
This section contains the Cisco Fabric Services (CFS) messages.
CFS-2
Error Message CFS-2-MTS_REJECT: Verification failed reject MTS message SAP
[dec]:RR-token [hex].
Explanation
This MTS message could have been posted by the previous active running pre 3.x; MTS
structure has changed since then hence ignore the MTS message, Source SAP [dec]; RR-token [hex].
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.2(1).
Error Message CFS-2-CFS_REJECT: CFS reject: [chars]: Switch WWN [chars], reason
[chars].
Explanation
When Cisco Fabric Service (CFS) receives a malformed CFS packet from a switch with
WWN and IP address shown in the error message, then CFS rejects the packet.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message CFS-2-EXITING: Exit reason: [chars].
Explanation
The Cisco Fabric Services process has exited because of the error shown in the error
message. The process will be restarted automatically.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).