Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-24
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message CDP-6-PORTDOWN: A CDP enabled port [chars] went down.
Explanation
A Cisco Discovery Protocol enabled port became unoperational. The error message
shows the Interface-ID string that identifies the port.
Recommended Action This is an informational message.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message CDP-6-PORTENABLE: CDP enabled on port [chars].
Explanation The Cisco Discovery Protocol was enabled on a port. The error message shows the
Interface-ID string that identifies the port.
Recommended Action This is an informational message.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message CDP-6-PORTUP: A CDP enabled port [chars] came up.
Explanation
A Cisco Discovery Protocol enabled port became operational. The error message shows
the Interface-ID string that identifies the port.
Recommended Action This is an informational message.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
CERT ENROLL Messages
Error Message CERT_ENROLL-2-CERT_EN_PROGRAM_EXIT: cert_enroll daemon exiting:
[chars].
Explanation
The process is responsible for digital certificate enrollment exited.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message CERT_ENROLL-3-CERT_EN_ERROR_MESSAGE: [chars].
Explanation
The digital certificate enrollment process generated an error message.
Recommended Action Review the error in the message to determine the next steps.
Introduced Cisco MDS SAN-OS Release 3.0(1).