HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE-TE, December 2006)

Figure 37 Rescannin g disks
Setting MPIO load balancing policy
You must specify how the iSCSI targets will ma nage and share network traffic for the host. For both targets:
1. O pen the Microsoft iSCSI Initiator Properties window.
2. Click the Targets tab.
3. Select a target an d click Details.
A Target Properties window opens.
4. Click the Devices tab.
5. Select the appropriate device and click Advanced.
A Device Details window opens.
6. Select a load balance policy from the list (Figure 38).
C-Series iSCSI
41