HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE-TE, December 2006)

Testing connect
ivity
To test connect
ivity, issue the ping command from the host (ping the C-Series Fibre Channel switches)
and the switche
s (ping the server’s t wo IP addresses). If host and switches are able to ping each other’s
respective IP
addresses you can proceed with the final steps.
Presenting iSCSI hosts as virtual Fibre Channel hosts
After establishing IP connectivity, you must configure the host and switches for iSCSI discovery and login.
Host side: iSCSI Initiator configuration
You must specify the iSCSI targets that the host will access.
1. Double-click the Microsoft iSCSI Initiator icon to open the iSCSI Initiator Properties window
(Figure 25).
Figure 25 iSC SI Initiator Properties window
2. On the Discovery Tab, click Add under Target Portals.
The Ad
d Target Portal window opens (Figure 26).
C-Series iSCSI 33