HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE-TE, December 2006)

•Socket
4. Click OK.
The I P address is added to the Available Portals list (Figure 6).
The iSCSI Initiator connects to the C-Series IP Storage Ser vices Modules (IPS-4, IPS-8), Multi-protocol
Services M odule (14/2),, or MDS 9216i switch.
TheC-SeriesIPStorageServicesModules(IPS-4,IPS-8),Multi-protocolServicesModule(14/2),or
MDS 9216i switch generates a unique WWPN for the iSCSI initiator’s IP address.
Figure 6 i
SCSI Initiator Properties—Target Portals
You can verify the iSCSI connection and WW PN mapping on the IP Storage Services Modules (IPS-4,
IPS-8), Multi-protocol Services Module (14/2), and MDS 9216i switch two ways:
• With the Device Manager GUI:
Select IP > iSCSI.
The IP iSCSI window appears (Figure 7).
Figure 7 IP iSCSI window—Initiators tab
18