Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-17
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message BOOTVAR-3-LOAD_VERIFY_LIB_FAILED: Fetching library [chars] failed,
reason=[chars].
Explanation The boot variable verification library specified failed to load.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message BOOTVAR-3-MODULE_LOCK_FAIL: Unable to get module lock, please don’t
reload <error-id:[hex]
Explanation Unable to acquire modlock to prevent user to reload during auto-sync.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Deprecated Cisco MDS SAN-OS Release 3.0(1).
Error Message BOOTVAR-3-NEIGHBOR_REJECT_AUTOCOPY: auto-copy failed - not supported
by neighbor supervisor.
Explanation
The standby supervisor does not support automatic copy. This automatic copy attempt
has failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message BOOTVAR-3-VERIFY_FAILED: Image [chars] for bootvar [chars]
verification failed, reason=[chars].
Explanation
The image set for this boot variable has failed the verification process. This is just a
warning.
Recommended Action Check the reason shown in the error message to determine what action to take.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
BOOTVAR-5
Error Message BOOTVAR-5-AUTOCOPY_SUCCEED: auto-copy of file [chars] to standby
supervisor succeed.
Explanation Automatic copy of the file succeeded. Image integrity was verified by the standby
supervisor.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).