Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-328
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_MEM_SIZE ) Memory size
error [chars].
Explanation The detected memory size does not match the expected memory size for the cluster.
Recommended Action A memory module on the Caching Services Module is probably faulty. Reload
the node. If the error persists, replace the Caching Services Module.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_MISSING_RES ) Unable
to form a cluster due to lack of cluster resources [chars].
Explanation The node is unable to locate sufficient other nodes in the cluster or the quorum disk
controller needed in order to form a cluster.
Recommended Action Check the status of the quorum disk controller and the other nodes in the
cluster. If the quorum disk has failed, perform the problem determination procedures for the disk
controller. Otherwise perform problem determination on the missing nodes and network.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_NO_FABRIC ) The node
is unable to see the FC fabric [chars].
Explanation No active or functioning logical Fibre Channel port was detected by the software.
Recommended Action Reload the node. If the problem persists, replace the Caching Services Module.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_PWR_DMN_ERR ) Power
domain error [chars].
Explanation
The two nodes in an I/O group are on the same Caching Services Module.
Recommended Action Determine if both nodes on the Caching Services Module are in fact in the
same I/O group. If so, determine what the configuration should be. Remove one of the nodes and
add a node to the I/O group which is not on the same Caching Services Module. If both nodes are
not in the same I/O group, ask your customer support representative for assistance.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_REPEATED_ASSERTS )
Node repeatedly crashing due to a software fault [chars].
Explanation
The number of software faults has exceeded the maximum allowed for the time period.
Recommended Action 1. Delete the node from the cluster. 2. Add the node back into the cluster. 3.
Ensure that the software is at the latest level on the cluster. If not, upgrade the cluster with the latest
level of code. 4. If the error continues, ask your customer support representative for assistance.
Introduced Cisco MDS SAN-OS Release 1.3(1).