Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-203
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Deprecated Cisco MDS SAN-OS Release 2.0(1b).
Error Message MODULE-5-MOD_STARTUP_CFG_MISMATCH: The startup configuration cannot be
applied to a different module type for module [dec] (serial: [chars]). [chars]
module is replacing [chars].
Explanation
The startup configuration for the module contains information about a different type of
module instead of containing information about the current one.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message MODULE-5-MOD_WARNING: Module [dec] reported warnings on ports
[dec]/[dec]-[dec]/[dec] ([chars]) due to [chars] in device [dec] (error [hex]).
Explanation
Module [dec] reported a warning in the runtime diagnostic because the failure of some
of the ports.
Recommended Action Collect module information by entering the show module internal all module
[dec] command or by using a similar Fabric Manager procedure.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Deprecated Cisco MDS SAN-OS Release 2.0(1b).
Error Message MODULE-5-STANDBY_SUP_OK: Supervisor [dec] is standby.
Explanation Module is ready to be configured and to switch traffic.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message MODULE-5-XBAR_OK: Xbar [dec] is online (serial: [chars]).
Explanation
Xbar is ready to be configured and to switch traffic.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message MODULE-5-XBAR_REINIT: Re-initializing xbar [dec] (serial: [chars]).
Explanation
Xbar reported a failure during the initialization phase and will be rebooted.
Recommended Action Collect information about the module by issuing the show module internal
all xbar <modulenumber> CLI command or by using a similar Fabric Manager procedure.
Introduced Cisco MDS SAN-OS Release 3.0(1).