Cisco Nexus 5000 Series Release Notes, Release 4.0(1a)N1(1) (OL-16601-01 G0)

Send documentation comments to [e-mail]
23
Cisco Nexus 5000 Series Release Notes, Release 4.0(1a)N1(1)
OL-16601-01
Related Documentation
Open Caveats
• CSCq57019
Symptom: The Fabric Manager N-Port Virtualization (NPV) Wizard does not list the Nexus 5000
Series switches that are operating in NPV mode.
Workaround: None.
• CSCsq06170
Symptom: In Fabric Manager, only one power supply is displayed for a Nexus 5000 Series switch
with two power supplies.
Workaround: Use Device Manager, which displays the correct information when you use the
Power Supplies menu item from the Physical menu.
• CSCso82992
Symptom: When using the Roles dialog box in Device Manager, if you edit the role scopes for a
role that already has role scopes defined, and then click the Apply button, an error message dialog
box states that the entry already exists.
Workaround: The changes are saved if you click the Apply button again.
• CSCsq23436
Symptom: The load-balancing and traffic-engineering features are not supported on Nexus 5000
Series switches in NPV mode, but Fabric Manager does not disable the configuration of these
features. In the Switches > NPV information pane, the Load Balancing tab provides a check box to
enable the feature, and the Traffic Engineering tab provides a dialog box to create a traffic
engineering session.
Workaround: Ignore these configuration options for Nexus 5000 Series switches.
• CSCsq14828
Symptom: The web client does not display flow statistics or the Ethernet interface statistics for
initiators using Fibre Channel over Ethernet (FCoE) connections to the Nexus 5000 Series switch.
Workaround: Use Flow Statistics in Fabric Manager, which displays the flow statistics correctly.
The Device Manager displays the Ethernet interface statistics correctly.
• CSCsq32710
Symptom: If you logged in to the Nexus 5000 Series switch using a user-defined role, you cannot
retrieve the Fibre Channel interfaces using SNMP.
Workaround: You can retrieve the information using CLI commands.
Related Documentation
The Nexus 5000 Series documentation is available at the following URL:
http://www.cisco.com/en/US/products/ps9670/tsd_products_support_series_home.html
The following are related Cisco Nexus 5000 Series documents:
• Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, Release 4.0
• Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, Release 4.0
• Cisco Nexus 5000 Series System Messages Reference, Release 4.0
• Cisco Nexus 5000 Series MIB Quick Reference, Release 4.0