Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
8-62
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fcping
The following example shows the setting of the timeout value. The default period to wait is 5 seconds.
The range is from 1 through 10 seconds.
switch# fcping fcid 0xd500b4 vsan 1 timeout 10
The following example displays fcping operation using the device alias of the specified destination:
switch# fcping device-alias x vsan 1