Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
7-41
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 7 System Management Commands
show ntp peer-status
show ntp peer-status
To do display the status of the Network Time Protocol peers, use the show ntp peer-status command.
show ntp peer-status
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the peer status for NTP:
switch(config)# show ntp peer-status
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show ntp peers Displays information about NTP peers.