Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
6-91
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
role feature-group name
role feature-group name
To create or specify a user role feature group and enter user role feature group configuration mode, use
the role feature-group name command. To delete a user role feature group, use the no form of this
command.
role feature-group name group-name
no role feature-group name group-name
Syntax Description
Command Default None
Command Modes Configuration mode
Command History
Examples This example shows how to create a user role feature group and enter user role feature group
configuration mode:
switch(config)# role feature-group name MyGroup
switch(config-role-featuregrp)#
This example shows how to remove a user role feature group:
switch(config)# no role feature-group name MyGroup
Related Commands
group-name User role feature group name. The group-name has a maximum length of 32
characters and is a case-sensitive, alphanumeric character string.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
feature-group name Specifies or creates a user role feature group and enters user role feature
group configuration mode.
show role
feature-group
Displays the user role feature groups.