Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
2-31
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 2 Ethernet Commands
mac-address-table notification
mac-address-table notification
To configure log message notification of MAC address table events, use the mac-address-table
notification command. To disable log message notifications, use the no form of this command.
mac-address-table notification {mac-move | threshold [limit percentage interval seconds]}
no mac-address-table notification {mac-move | threshold}
Syntax Description
Command Default None
Command Modes Configuration mode
Command History
Examples This example shows how to configure log message notification when the threshold exceeds 45 percent,
restricting the update interval to once every 1024 seconds:
switch(config)# mac-address-table notification threshold limit 45 interval 1024
Related Commands
mac-move Sends a notification message if the MAC address is moved.
threshold Sends a notification message if the MAC address table threshold is exceeded.
limit percentage (Optional) Specifies the percentage limit (1 to 100) beyond which threshold
notifications are enabled.
interval seconds (Optional) Specifies the minimum time in seconds (10 to 10000) between
two notifications.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show
mac-address-table
Displays information about MAC address table.