Release Notes for the Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 15.0(2)SE and Later

3
Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 15.0(2)SE and Later
OL-27316-02
System Requirements
Caution The Cisco Catalyst Blade Switch 3120 for HP switch modules do not support switch stacks with other
types of blades switches as members. Combining the Cisco Catalyst Blade Switch 3120 for HP with
other types of blade switches in a switch stack might cause the switch to work improperly or to fail.
Device Manager System Requirements
• Hardware Requirements, page 3
• Software Requirements, page 3
Hardware Requirements
Ta b l e 2 Minimum Hardware Requirements
Processor Speed DRAM Number of Colors Resolution Font Size
233 MHz minimum
1
1. We recommend 1 GHz.
512 MB
2
2. We recommend 1-GB DRAM.
256 1024 x 768 Small
Software Requirements
• Windows 2000, XP, Vista, and Windows Server 2003.
• Internet Explorer 6.0, 7.0, Firefox 1.5, 2.0 or later with JavaScript enabled.
The device manager verifies the browser version when starting a session and does not require a plug-in.
Supports OneX
(CVR-X2-SFP10G)
and t
hese SFP+
modules
SFP-10G-SR
Only version 02 or later CX1
3
cables are supported:
SFP-H10GB-CU1M 
SFP-H10GB-CU3M
SFP-H10GB-CU5M
12.2(55)SE1
1. X2 module supported only on the CBS3120X-S model
2. SFP = small form-factor pluggable
3. The CX1 cables are used with the OneX converters.
Table 1 Cisco Catalyst Blade Switch 3120 for HP Supported Hardware (continued)
Switch Hardware Description Minimum Cisco IOS Release