Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(50)SE and Later

OL-18270-03

Documentation Updates

Error Message DOT1X_SWITCH-5-ERR_VLAN_NOT_FOUND: Attempt to assign non-existent or

shutdown VLAN [dec] to 802.1x port [chars]

Error Message DOT1X_SWITCH-5-ERR_VLAN_ROUTED_PORT: Attempt to assign VLAN [dec] to

routed 802.1x port [chars]

Error Message UDLD-3-UDLD_IDB_ERROR: UDLD error handling [chars] interface [chars].

Error Message UDLD-3-UDLD_INTERNAL_ERROR: UDLD internal error [chars].

Error Message UDLD-3-UDLD_INTERNAL_IF_ERROR: UDLD internal error, interface [chars]

[chars].

Error Message UDLD-4-UDLD_PORT_DISABLED: UDLD disabled interface [chars], [chars]

detected.

Error Message UDLD-6-UDLD_PORT_RESET: UDLD reset interface [chars].

Error Message UFAST_MCAST_SW-3-PROC_START_ERROR: No process available for

transmitting UplinkFast packets.

Error Message UFAST_MCAST_SW-4-MEM_NOT_AVAILABLE: No memory is available for

transmitting UplinkFast packets on Vlan [dec].

Error Message VQPCLIENT-2-CHUNKFAIL: Could not allocate memory for VQP.

Error Message VQPCLIENT-2-DENY: Host [enet] denied on interface [chars].

Error Message %VQPCLIENT-2-INITFAIL: Platform-specific VQP initialization failed.

Quitting

Error Message %VQPCLIENT-2-IPSOCK: Could not obtain IP socket

Error Message %VQPCLIENT-7-NEXTSERV: Trying next VMPS [IP_address]

Error Message %VQPCLIENT-7-PROBE: Probing primary server [IP_address]

Error Message %VQPCLIENT-2-PROCFAIL: Could not create process for VQP. Quitting