Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(50)SE and Later

OL-18270-03

Documentation Updates

Error Message %SPANTREE_VLAN_SHIM-3-ADD_REGISTRY_FAILED: Subsystem [chars] fails to

add callback function [chars]

Explanation

A subsystem has added its callback functions. Use this message only for debugging. The

first [chars] is the subsystem name, and the second [chars] is the function name.

Recommended Action No action is required.

Error Message %SPANTREE_VLAN_SHIM-2-MAX_INSTANCE: Platform limit of [dec] STP

instances exceeded. No instance created for [chars] (port [chars]).

Explanation

The number of VLAN spanning-tree instances has reached the allowable maximum. No

more VLAN instances are created until instances are less than the maximum. [dec] is the maximum,

the first [chars] is the VLAN for which an STP instance is not created, and the second [chars] is the

port number.

For example, when you are configuring spanning tree and the allowable maximum is 128 instances

–

If the switch has already created 128 instances and you enter the vlan 200-1000 global interface

configuration command, the first [chars] is 200, and an STP instance for VLAN 200 is not

created.

–

If the switch has already created 100 instances and you enter the vlan 200-1000 global interface

configuration command, the first [chars] is 228. The switch creates STP instances for VLAN

200 to VLAN 227, but not for VLAN 228. 200 is not created.

STP instances are also not created for the remainder of the VLANs in the range

Recommended Action Reduce the number of active spanning-tree instances by either disabling some

or deleting the VLANs associated with them. To create STP instances, manually create them. If you

do not, the switch automatically creates an STP instances when a VLAN is created.

For example, if the switch has already created 128 instances and you want to create an STP instance

for VLAN 200, remove a spanning-tree instance with one of these commands:

–

To delete one of the VLANs with an STP instance, enter the no vlan vlan-id global

configuration command .

–

To disable spanning tree on a per-VLAN basis. enter the no spanning-tree vlan-id global

configuration command.

Then enter the spanning-tree 200 global configuration command to create an instance for

VLAN 200.

These messages have been deleted:

Error Message ACLMGR-2-NOVMR: Cannot create VMR data structures for access list

[chars].

Error Message DOT1X-5-INVALID_INPUT: Dot1x Interface parameter is Invalid on

interface [chars].

Error Message DOT1X-5-SECURITY_VIOLATION: Security violation on interface [chars],

New MAC address [enet] is seen.