Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(50)SE and Later

32
Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(50)SE and Later
OL-18270-03
Documentation Updates
Error Message %EC-5-MINLINKS_MET: Port-channel [chars] is up as its bundled ports
([dec]) meets min-links
Recommended Action
The administrative configuration of minimum links is equal to or less than the
number of EtherChannel ports. The port channel is up. [chars] is the EtherChannel, and [dec] is the
EtherChannel group number.
Recommended Action No action is required.
Error Message %EC-5-MINLINKS_NOTMET: Port-channel [chars] is down bundled ports
([dec]) doesn't meet min-links
Explanation
The administrative configuration of minimum links is greater than the number of
bundled ports. The port channel is down. [chars] is the EtherChannel, and [dec] is the EtherChannel
group number.
Recommended Action Reduce the value of the minimum-links configuration parameter for an
EtherChannel , or add more ports to the EtherChannel to create a bundle.
Error Message %IP_DEVICE_TRACKING_HA-3-FAIL_SEND_MSG_TO_ACTIVE: Failed to send
[chars] message to active for [chars], [chars]
Explanation
The Inter-Process Communication (IPC) synchronization message was could not sent to
the stack member in the run-time module because of a software error. For more information, see the
message on the console or in the system log. The system state between the stack members and
provisioned switches might not be synchronized. The first [chars] is the synchronization message,
the second [chars] is the stack master number, and the third [chars] is the run-time module.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the “Error Message Traceback Reports” section on page 2-7.
Error Message %IP_DEVICE_TRACKING_HA-3-NO_RESOURCES: [chars]
Recommended Action
The software could not get the required resources to complete a task. This was
probably caused by a software error or a lack of available memory. For more information, see the
message on the console or in the system log. The system state between the active and standby units
might not be synchronized. [chars] is message.
Recommended Action If a lack of available memory caused the problem, reduce other system activity,
or allocate more memory for this task. If the problem recurs, copy the message exactly as it appears
on the console or in the system log. Research and attempt to resolve the error by using the Output
Interpreter. Enter the show tech-support user EXEC command to gather data that might help
identify the nature of the error. Use the Bug Toolkit to look for similar reported problems. If you
still require assistance, open a case with the TAC, or contact your Cisco technical support
representative, and provide the representative with the gathered information. For more information
about these online tools and about contacting Cisco, see the “Error Message Traceback Reports”
section on page 2-7.