Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(50)SE and Later

OL-18270-03

Documentation Updates

Updates to the Switch Getting Started Guide

When you launch Express Setup, you are prompted for the switch password. Enter the default password,

cisco. The switch ignores text in the username field. Before you complete and exit Express Setup, you

must change the password from the default password, cisco.

Updates for the System Message Guide

These messages were added:

Error Message ACLMGR-2-NOVMR: Cannot generate hardware representation of access list

[chars]

Explanation

There are insufficient resources available to create a hardware representation of the

ACL. A lack of available logical operation units or specialized hardware resources can cause this

problem. Logical operation units are needed for a TCP flag match or a test other than eq (ne, gt, lt,

or range) on TCP, UDP, or SCTP port numbers.

Recommended Action Modify the ACL configuration to use fewer resources, or rename the ACL with

a name or number that alphanumerically precedes the other ACL names or numbers.

Error Message %DOT1X-5-FAIL: Authentication failed for client ([chars]) on Interface

[chars]

Explanation

Authentication was unsuccessful. The first [chars] is the hostname, and the second

[chars] is the interface.

Recommended Action No action is required.

Error Message %DOT1X-5-SUCCESS: Authentication successful for client ([chars]) on

Interface [chars]

Explanation

Authentication was successful. The first [chars] is the host name, and the second [chars]

is the interface.

Recommended Action No action is required.

Error Message %DOT1X_SWITCH-4-PROC_START_ERR: Unable to start dot1x switch process.

Explanation

The software could not start the 802.1x authentication process.

Recommended Action Use the reload privileged EXEC command to reload the switch.