Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(50)SE and Later

OL-18270-03

Resolved Caveats

• CSCta57846

The switch unexpectedly reloads when copying a configuration file from a remote server or from

flash memory containing logging file flash:

The workaround is to enter the logging file flash:filename global configuration command to

configure logging to flash instead of copying to flash.

Resolved Caveats

Cisco IOS Caveats Resolved in Cisco IOS Release 12.2(50)SE3

• CSCsl72774

Memory allocation errors no longer occur when the Cisco Express Forwarding (CEF) consistency

checkers have been enabled. The CEF consistency checkers have been enabled by default. They can

also be enabled by using these global configuration commands:

cef table consistency-check ipv4

cef table consistency-check ipv6

• CSCso57496

A switch no longer fails when you enter the configure replace privileged EXEC command, and a

banner is already present in the switch configuration.

• CSCso90107

You can now query the bgpPeerTable MIB for VPN/VRF interfaces.

• CSCsq51052

The output of the show ip ssh privileged EXEC command no longer displays SSH Enabled -

version 2.99. Instead, a correct SSH version (1.5, 1.99 or 2.0) now appears.

• CSCta32597

A switch no longer fails when a host moves from a dynamically assigned VLAN to a configured

VLAN.

• CSCta36155

A switch configured with 802.1x and port security on the same ports no longer might inappropriately

put the ports into an error-disabled state.

• CSCta56469

Moving a PC between two IP Phones without disconnecting either phone from the switch no longer

triggers a port-security violation.

• CSCta67777

A port security violation error no longer occurs when MAC address sticky learning is enabled on a

port and a CDP is enabled on a connected IP Phone.

• CSCsv32556

A Telnet, Secure Shell (SSH), or console session on the switch no longer fails when you use the

show file systems EXEC command or when you access the remote file system, flashn: (where n is

the switch number).