Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(46)SE

OL-16968-01

Important Notes

• When the flash memory of a stack member is almost full, it might take longer to start up than other

member switches. This might cause that switch to miss the stack-master election window. As a

result, the switch might fail to become the stack master even though it has the highest priority.

The workaround is to delete files in the flash memory to create more free space. (CSCsg30073)

Device Manager Limitations

These are the device manager limitations:

• When you are prompted to accept the security certificate and you click No, you only see a blank

screen, and the device manager does not start.

The workaround is to click Ye s when you are prompted to accept the certificate. (CSCef45718)

• If you launch the device manager from a Firefox web browser, an invalid certificate alert appears.

If you launch the device manager from an Internet Explorer 7.0 browser, a certificate error appears.

The workaround when using Firefox is to either temporarily or permanently accept the certificate.

If you temporarily accept the certificate, close and then reopen the Firefox browser window. If you

permanently accept the certificate, delete the certificate, and then close and restart Firefox:

–

If you are using Firefox version 1.5, choose Tools > Options > Advanced > Security >

View Certificates > Web Sites, select the certificate, and click Delete.

–

If you are using Firefox version 2.0, choose Tools > Options > Advanced > Encryption > View

Certificates > Web Sites, select the certificate, and click Delete.

The workaround when using Internet Explorer is to click Click here for Options in the warning

message, and click Display Blocked Content. Close the browser window, and launch a new session.

(CSCsk80229)

Important Notes

These sections describe the important notes related to this software release:

• Cisco IOS Notes, page 16

• Device Manager Notes, page 17

Cisco IOS Notes

These notes apply to Cisco IOS software:

• If the switch requests information from the Cisco Secure Access Control Server (ACS) and the

message exchange times out because the server does not respond, a message similar to this appears:

00:02:57: %RADIUS-4-RADIUS_DEAD: RADIUS server 172.20.246.206:1645,1646 is not

responding.

If this message appears, make sure that there is network connectivity between the switch and the

ACS. You should also make sure that the switch has been properly configured as an AAA client on

the ACS.