Cisco Catalyst Blade Switch 3120 for HP System Message Guide

2-75

OL-12249-01

Chapter 2 Message and Recovery Procedures

RMON Messages

Error Message QOSMGR-4-NOT_SUPPORTED: Action ’[chars]’ is not supported for a

policymap attached to output side.

Explanation

A set or trust policy-map class configuration command was configured in a policy map

and attached to an egress interface. A warning message is logged, and the actions do not take effect.

This is a hardware limitation. [chars] is either the set or trust action.

Recommended Action Do not configure a set or trust policy-map class configuration command in a

policy map and attach it to an egress interface. These policy-map actions are supported only on

ingress interfaces.

Error Message QOSMGR-4-POLICER_PLATFORM_NOT_SUPPORTED: Policer configuration has

exceeded hardware limitation for policymap [chars].

Explanation

The policy-map configuration has exceeded the limitation of the hardware. You

configured more policers together in all policy maps (by using the police or police aggregate

policy-map class configuration command) than supported by hardware. [chars] is the policy-map

name.

Recommended Action Reconfigure the class maps or the policy maps, or delete the policy map from

some interfaces.

Error Message QOSMGR-4-POLICER_POLICY_NOT_SUPPORTED: Number of policers has exceeded

per policy hardware limitation for policymap [chars].

Explanation

The policy-map configuration has exceeded the limitation of the hardware. You

configured more policers in a policy map (by using the police or police aggregate policy-map class

configuration command) than supported. [chars] is the policy-map name.

Recommended Action Reconfigure the class map or the policy map, and reduce the number of

policers.

RMON Messages

This section contains the remote network monitoring (RMON) messages.

Error Message RMON-5-FALLINGTRAP: Falling trap is generated because the value of

[chars] has fallen below the falling-threshold value [dec].

Explanation

A falling trap has been generated. The value of the specified MIB object has fallen

below the falling threshold value. [chars] is the MIB object, and [dec] is the threshold value.

Recommended Action Take appropriate action on the specified MIB object.