Cisco Catalyst Blade Switch 3120 for HP System Message Guide

2-61

OL-12249-01

Chapter 2 Message and Recovery Procedures

PLATFORM_WCCP Messages

This section contains platform Web Cache Communication Protocol (WCCP) messages.

Error Message PLATFORM-WCCP-3-NO_LABEL: Cannot allocate WCCP Label

Explanation The WCCP label could not be allocated. This means that the hardware cannot be

programmed to implement WCCP redirection.

Recommended Action Reduce the number of interfaces configured for WCCP redirection or policy

based routing.

Error Message PLATFORM-WCCP-4-SDM_MISMATCH: WCCP requires sdm template routing

Explanation

To support this feature, you need to enable the Switch Database Management (SDM)

routing template.

Recommended Action Modify the SDM template to enable the routing template. Use the sdm prefer

routing global configuration command, and then reload the switch by using the reload privileged

EXEC command.

PM Messages

This section contains the port manager messages. The port manager is a state machine that controls all

the logical and physical interfaces. All features, such as VLANs, UDLD, and so forth, work with the port

manager to provide switch functions.

Error Message PM-2-LOW_SP_MEM: Switch process available memory is less than [dec]

bytes.

Explanation

The available memory for the switch processor is low. This can occur when too many

Layer 2 VLANs are configured. [dec] is the available memory.

Recommended Action Remove features from the system to reduce memory usage.

Error Message PM-2-NOMEM: Not enough memory available for [chars].

Explanation

The port manager subsystem could not obtain the memory it needed to initialize the

specified operation. [chars] is the port manager operation.

Recommended Action Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Enter the show

tech-support user EXEC command to gather data that might help identify the nature of the error.

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP

technical support and provide the representative with the gathered information. For more

information about the online tools and about contacting HP, see the “Error Message Traceback

Reports” section on page 1-5.