Cisco Catalyst Blade Switch 3120 for HP System Message Guide

vii

OL-12249-01

Preface

Audience

This guide is for the networking professional managing the Cisco Catalyst Blade Switch 3120 for HP or

blade switch stack, known as the switch. Before using this guide, you should have experience working

with the Cisco IOS software and the switch software features.

Purpose

This guide describes only the Cisco Catalyst Blade Switch 3120 for HP-specific system messages that

you might encounter. For a complete list of Cisco IOS system error messages, see the Cisco IOS Software

System Error Messages, Cisco IOS Release 12.2 available from the Cisco.com home page by selecting

Technical Support & Documentation > Documentation > Cisco IOS Software.

This guide does not describe how to install your switch or how to configure software features on your

switch. It also does not provide detailed information about commands that have been created or changed

for use by the switch. For hardware installation information, see the hardware installation guide that

shipped with your switch. For software information, see the software configuration guide and the

command reference for this release.

For documentation updates, see the release notes for this release.

Conventions

This publication uses these conventions to convey instructions and information:

Command descriptions use these conventions:

• Commands and keywords are in boldface text.

• Arguments for which you supply values are in italic.

• Square brackets ([ ]) mean optional elements.

• Braces ({ }) group required choices, and vertical bars ( | ) separate the alternative elements.

• Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional

element.