Cisco Catalyst Blade Switch 3120 for HP System Message Guide

2-44

OL-12249-01

Chapter 2 Message and Recovery Procedures

IP_DEVICE_TRACKING Messages

Error Message IMAGEMGR-6-AUTO_COPY_SW_INITIATED: Auto-copy-software process

initiated for systems [bits: [hex]].

Explanation

Systems with incompatible software have been detected in the switch stack. The stack

now finds out whether or not software is available to be copied to the incompatible systems and

whether or not it is appropriate to automatically copy the software. [bits [hex]] is the bit

representation of the switch number.

Recommended Action No action is required.

Error Message IMAGEMGR-6-AUTO_COPY_SW: [chars].

Explanation

A line of output from the auto-copy-software process appears. [chars] is a text message

reporting status of the upgrade process.

Recommended Action No action is required.

Error Message IMAGEMGR-6-AUTO_DOWNLOAD_SW_INITIATED: Auto-download-software process

initiated for systems [bits: [hex]].

Explanation

Systems with incompatible software have been detected in the switch stack. The stack

now attempts to download software from a previously configured location and to install it to make

the systems compatible. [bits [hex]] is the bit representation of the switch number.

Recommended Action No action is required.

Error Message IMAGEMGR-6-AUTO_DOWNLOAD_SW: [chars].

Explanation

A line of output from the auto-download-software process appears [chars] is a text

message reporting the status of the upgrade process.

Recommended Action No action is required.

IP_DEVICE_TRACKING Messages

This section contains the IP Device Tracking message.

Error Message IP_DEVICE_TRACKING-4-TABLE_LOCK_FAILED: Table already locked by

process-id [dec]([chars])

Explanation

The IP device tracking table could not be updated due to a lock held by another process.

[dec] is the process number, and [chars] is the process.

Recommended Action No action is required.