Cisco Catalyst Blade Switch 3120 for HP System Message Guide

2-39
Cisco Catalyst Blade Switch 3120 for HP System Message Guide
OL-12249-01
Chapter 2 Message and Recovery Procedures
HARDWARE Messages
Error Message HARDWARE-2-FAN_ERROR: Fan Failure.
Explanation
This message means that the fan is not working.
Recommended Action This is a hardware failure. The fan might recover automatically. If the fan
failure persists, copy the message exactly as it appears on the console or in the system log. Research
and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for
similar reported problems.If you still require assistance, contact HP technical support and provide
the representative with the gathered information. For more information about the online tools and
about contacting HP, see the “Error Message Traceback Reports” section on page 1-5.
Error Message HARDWARE-2-THERMAL_WARNING: Temperature has reached warning threshold.
Explanation This message means that the temperature sensor valve inside the switch reached the
warning threshold. The switch can function normally until the temperature reaches the critical
threshold.
Recommended Action The external temperature is high. Reduce the temperature in the room.
Error Message HARDWARE-3-ASICNUM_ERROR: Port-ASIC number [dec] is invalid.
Explanation
The port ASIC number used is invalid. Each port ASIC is identified by an ID. [dec] is
the ASIC number.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the “Error Message Traceback Reports” section on page 1-5.
Error Message HARDWARE-3-INDEX_ERROR: Index value [dec] is invalid.
Explanation
The index into the hardware table is out-of-range. [dec] is the index value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the “Error Message Traceback Reports” section on page 1-5.
Error Message HARDWARE-3-INTRNUM_ERROR: Port-ASIC Interrupt number [dec] is invalid.
Explanation
The interrupt ID used in a port ASIC is invalid. [dec] is the interrupt number.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the “Error Message Traceback Reports” section on page 1-5.