Cisco Catalyst Blade Switch 3120 for HP System Message Guide

2-36

OL-12249-01

Chapter 2 Message and Recovery Procedures

GBIC_SECURITY_UNIQUE Messages

This section contains the Cisco GBIC, SFP, and 10-Gigabit Ethernet module security messages that

identify whether the module is unique.

Note The switches support SFP and 10-Gigabit Ethernet modules and do not support GBIC modules.

Although the error message text refers to GBIC interfaces and modules, the messages from the switches

actually refer to the SFP and 10-Gigabit Ethernet module interfaces and modules.

Error Message GBIC_SECURITY_UNIQUE-3-DUPLICATE_GBIC: GBIC interface [dec]/[dec] is

a duplicate of GBIC interface [dec]/[dec].

Explanation

The SFP module was identified as a Cisco GBIC or SFP module, but its vendor ID and

serial number match that of another interface on the system. The first [dec]/[dec] is the interface of

the duplicate GBIC or SPF module, and the second [dec]/[dec] is the interface of the existing

module.

Recommended Action Cisco GBIC or SFP modules are assigned unique serial numbers. Verify that

the module was obtained from Cisco or from a supported vendor.

Error Message GBIC_SECURITY_UNIQUE-4-DUPLICATE_SN: GBIC interface [dec]/[dec] has

the same serial number as another GBIC interface.

Explanation

The SFP module was identified as a Cisco SFP module, but its serial number matches

that of another interface on the system. [dec]/[dec] is the interface in which the duplicate module is

installed.

Recommended Action Cisco SFP modules are assigned unique serial numbers. Verify that the module

was obtained from Cisco or from a supported vendor.

HARDWARE Messages

This section contains hardware messages.

Error Message HARDWARE-2-FAN_ERROR: Fan Failure.

Explanation

This message means that the fan is not working.

Recommended Action This is a hardware failure. The fan might recover automatically. If the fan

failure persists, copy the message exactly as it appears on the console or in the system log. Research

and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for

similar reported problems.If you still require assistance, contact HP technical support and provide

the representative with the gathered information. For more information about the online tools and

about contacting HP, see the “Error Message Traceback Reports” section on page 1-5.