Manualshelf

Cisco Catalyst Blade Switch 3120 for HP System Message Guide

ManualsBrandsHP ManualsComputer AccessoriesCisco Catalyst 1GbE 3120G Blade Switch
21222324252627282930
2-14
Cisco Catalyst Blade Switch 3120 for HP System Message Guide
OL-12249-01
Chapter 2 Message and Recovery Procedures
CLS_ACC Messages
Error Message CLS_ACC-3-VLAN_CREATE_FAIL: Failed to allocate a free vlan as
consoleless access vlan,use default mamagement vlan
Explanation
The switch cannot find a VLAN with an ID from 2 to1000 to be the management VLAN
for consoleless access.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the “Error Message Traceback
Reports” section on page 1-5.
Error Message CLS_ACC-4-NO_HTTP_PAGE: Failed to locate HTTP page for the consoleless
access mode
Explanation
The switch cannot find the HTTP page that appears in Express Setup mode because the
page is not on the flash memory.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the “Error Message Traceback
Reports” section on page 1-5.
Error Message CLS_ACC-4-UNEXPECTEDEVENT: Switch does not support or not ready for
consoleless access mode
Explanation
The switch does not support or is not ready to go into the consoleless access mode.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the “Error Message Traceback
Reports” section on page 1-5.
Error Message CLS_ACC-5-CLRCFG: User cleared switch configurations under recovery
mode
Explanation
In recovery mode, the switch resets to the default configuration.
Recommended Action No action is required.