Cisco Catalyst Blade Switch 3120 for HP System Message Guide

2-13
Cisco Catalyst Blade Switch 3120 for HP System Message Guide
OL-12249-01
Chapter 2 Message and Recovery Procedures
CLS_ACC Messages
Error Message CLS_ACC-3-NO_ACC_INTF: Failed to find a free interface as consoleless
access interface or failed to retrieve the access interface information
Explanation
The switch cannot find an interface to be the management interface for consoleless
access.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the “Error Message Traceback
Reports” section on page 1-5.
Error Message CLS_ACC-3-NOMEMORY: [chars]
Explanation
A request to configure the switch with consoleless access commands failed its memory
allocation. [chars] describes whether processor memory allocation or I/O memory allocation failed.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the “Error Message Traceback
Reports” section on page 1-5.
Error Message CLS_ACC-3-NOSOCKET: Fail to create DNS socket for consoleless access
Explanation
The socket creation process failed. The switch cannot go into consoleless access mode
and stops.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the “Error Message Traceback
Reports” section on page 1-5.
Error Message CLS_ACC-3-UNABLE_TO_RESET_CONFIG: [chars]
Explanation
The switch cannot reset the configuration.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the “Error Message Traceback
Reports” section on page 1-5.