Cisco Catalyst Blade Switch 3120 for HP System Message Guide

2-12

OL-12249-01

Chapter 2 Message and Recovery Procedures

CLS_ACC Messages

Error Message CLS_ACC-2-MODE_ENTERED: Entering consoleless access mode [chars]

Explanation

The switch enters consoleless access mode. [chars] is the name of the mode.

Recommended Action No action is required.

Error Message CLS_ACC-2-MODE_EXITED: Complete consoleless access from mode [chars]

Explanation The switch exits from consoleless access mode. [chars] is the mode.

Recommended Action No action is required.

Error Message CLS_ACC-2-NO_PROCESS: Process creation failure

Explanation

Failed to create process to execute consoleless access.

Recommended Action Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error using the Output Interpreter. Use the Bug Toolkit to look

for similar reported problems. If you still require assistance, open a case with the TAC, or contact

your Cisco technical support representative, and provide the representative with the gathered

information. For more information about these online tools and about contacting Cisco, see the “Error

Message Traceback Reports” section on page 1-5.

Error Message CLS_ACC-2-SETUP_BTN_PRS: [chars]

Explanation

Pressing the Mode button for more than 5 seconds causes an unconfigured switch to go

into Express Setup mode. Pressing the Mode button for more than 5 seconds does not affect an

already configured switch; the switch does not go into Express Setup mode. [chars] is the mode.

Recommended Action No action is required.

Error Message CLS_ACC-3-CONFIG_ERROR: [chars]

Explanation

The switch is not correctly configured for consoleless access mode and cannot go into

that mode. [chars] is the mode.

Recommended Action Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Enter the show

tech-support user EXEC command to gather data that might help identify the nature of the error.

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP

technical support and provide the representative with the gathered information. For more

information about the online tools and about contacting HP, see the “Error Message Traceback

Reports” section on page 1-5.