Cisco Catalyst Blade Switch 3120 for HP System Message Guide

2-105
Cisco Catalyst Blade Switch 3120 for HP System Message Guide
OL-12249-01
Chapter 2 Message and Recovery Procedures
VQPCLIENT Messages
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the “Error Message Traceback
Reports” section on page 1-5.
Error Message VQPCLIENT-2-DENY: Host [enet] denied on interface [chars].
Explanation
The VLAN Membership Policy Server (VMPS) has denied access for the given host
MAC address to an interface. [enet] is the host MAC address, and [chars] is the interface name.
Recommended Action No action is normally required. If you think that the host should have been
allowed access, verify the configuration on the VMPS.
Error Message VQPCLIENT-2-INITFAIL: Platform-specific VQP initialization failed.
Quitting.
Explanation
An error occurred during initialization of the VQP client platform-specific code.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems.If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the “Error Message Traceback
Reports” section on page 1-5.
Error Message VQPCLIENT-2-IPSOCK: Could not obtain IP socket.
Explanation
An error occurred when the system attempted to open an IP socket to the VMPS.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the “Error Message Traceback
Reports” section on page 1-5.
Error Message VQPCLIENT-2-PROCFAIL: Could not create process for VQP. Quitting.
Explanation
An error occurred while creating a process for the VQP client.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact HP
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting HP, see the “Error Message Traceback
Reports” section on page 1-5.