Cisco Catalyst Blade Switch 3120 for HP System Message Guide

2-100

OL-12249-01

Chapter 2 Message and Recovery Procedures

TCAMMGR Messages

STANDBY received a checkpoint message with a sequence number that does not match the expected

sequence number. The first [dec] is the expected checkpoint message sequence number, and the

second [dec] is the received checkpoint message sequence number.

Recommended Action Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error using the Output Interpreter. Use the Bug Toolkit to look

for similar reported problems. If you still require assistance, open a case with the TA C, or contact

your Cisco technical support representative, and provide the representative with the gathered

information. For more information about these online tools and about contacting Cisco, see the “Error

Message Traceback Reports” section on page 1-5.

Error Message SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to [chars].

Explanation The VLAN Trunking Protocol (VTP) domain name was changed through the

configuration to the name specified in the message. [chars] is the changed domain name.

Recommended Action No action is required.

Error Message SW_VLAN-6-VTP_MODE_CHANGE: VLAN manager changing device mode from

[chars] to [chars].

Explanation An automatic VTP mode device change occurred upon receipt of a VLAN configuration

database message containing more than a set number of VLANs. The first [chars] is the previous

mode, and the second [chars] is the current mode.

Recommended Action No action is required.

TCAMMGR Messages

This section contains the ternary content-addressable memory manager (TCAMMGR) messages.

Error Message TCAMMGR-3-GROW_ERROR: cam region [dec] can not grow.

Explanation

The specified CAM region is configured as a static region with a fixed number of

entries, and a caller requested to add more CAM entries. [dec] is the CAM region.

Recommended Action Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to

look for similar reported problems. If you still require assistance, contact HP technical support and

provide the representative with the gathered information. For more information about the online

tools and about contacting HP, see the “Error Message Traceback Reports” section on page 1-5.