Cisco Catalyst Blade Switch 3120 for HP System Message Guide

2-87

OL-12249-01

Chapter 2 Message and Recovery Procedures

STORM_CONTROL Messages

Error Message STACKMGR-4-SWITCH_ADDED_VM: Switch [dec] has been ADDED to the stack

(VERSION_MISMATCH).

Explanation

A switch that has been added to the stack has a different software version. [dec] is the

switch number.

Recommended Action No action is required.

Error Message STACKMGR-4-SWITCH_REMOVED: Switch [dec] has been REMOVED from the

stack.

Explanation

The specified switch has been removed from the stack. [dec] is the switch number.

Recommended Action No action is required.

Error Message STACKMGR-5-MASTER_READY: Master Switch [dec] is READY.

Explanation The stack master is ready for use. [dec] is the stack master switch number.

Recommended Action No action is required.

Error Message STACKMGR-5-SWITCH_READY: Switch [dec] is READY.

Explanation

The switch is ready. [dec] is the switch number.

Recommended Action No action is required.

STORM_CONTROL Messages

This section contains the storm control messages.

Error Message STORM_CONTROL-3-FILTERED: A [chars] storm detected on [chars]. A

packet filter action has been applied on the interface.

Explanation

The amount of traffic detected on the interface has exceeded the configured threshold

values. The system is filtering the excess traffic. The first [chars] is the traffic type, and the second

[chars] is the interface.

Recommended Action Determine and fix the root cause of the excessive traffic on the interface.