Release Notes for the Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 15.0(2)SE and Later

24
Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 15.0(2)SE and Later
OL-27316-02
Resolved Caveats
• CSCth59458
If a redundant power supply (RSP) switchover occurs during a bulk configuration synchronization,
some of the line configurations might disappear.
The workaround is to reapply the line configurations.
• CSCtl12389
The show ip dhcp pool command displays a large number of leased addresses.
The workaround is to turn off ip dhcp remember and reload the switch.
• CSCtq64716
The following warning messages might be displayed during the boot process even when a RADIUS
or a TACACS server have been defined:
%RADIUS-4-NOSERVNAME:
or
%AAAA-4-NOSERVER: Warning: Server TACACS2 is not defined
There is no workaround.
• CSCtr37757
The secure copy feature (copy: source-filename scp: destination-filename command) does not work.
There is no workaround.
• CSCtt41416
The show switch chassis management command incorrectly displays all slot numbers as 0.
There is no workaround.
• CSCtz98066
When the master switch (Switch A) is reloaded or loses power and rejoins the stack as a member
switch, any traffic stream that exits Switch A is dropped because the newly joined member is not
able to establish an Address Resolution Protocol (ARP) entry for the next hop router or switch.
Debugs confirm that Switch A does not send a GARP or ARP for the next hop, though traffic
continues to be sent to the switch.
The workaround is to add a static ARP. Ping the destination from Switch A to force the ARP to
respond.
• CSCtz99447
Local web authorization and HTTP services on the switch do not respond because of a web
authorization resource limitation in the system. The resource limitation is normally caused by
incorrectly terminated HTTP or TCP sessions.
These are possible workarounds and are not guaranteed to solve the problem:
– Enter the ip admission max-login-attempts privileged EXEC command to increase the number
of maximum login attempts allowed per user.
– If the web authorization module is intercepting HTTP sessions from web clients in an attempt
to authorize them, try using a different browser.
– Eliminate background processes that use HTTP transport.
• CSCua54224